Safe Introdution

1. To make sure the service voltage is not higher than the rated value, or lower than the rated value which descripted in using instruction..
2. Don’t stare at light derectly when you using light, or it will get hurt at you eyes.
3. Don’t keep the lights on sunshine, wet and dust when you installed, be sure the distance is not less than 0.5 meters from the illuminated object. Make up that is not inflammable and explosive dangerous goods in 0.5 meters.
4. Be sure that is appropriate and safe line when you connecting with lights.
5. Please you were familiar with fuction of lights before you operating. Normally, the damage of the light because of inapproriated operation, so be sure that is a pofessional engineer to operate the lights. Don’t swag the light and casually operating.
6. Don’t amend lights casually, or it will lead to short circuit, we don’t offer amending for it.

LED MOON FLOWER

ⅰ. SKILL SPECIFICATION
Mode: M-L180
Voltage: □AC22V/50Hz □AC240V/60Hz
Lamp: F5 LED emitting diode 469 lights, 280 red lights, 126 blue lights,
63 green lights
Rated power: 20W
Insulating fuse: ﹥2MΩ
Channel: 11channel
Control signal: international standard DMX512 signal(1990)
Control mode: 512 signal control, master/slave mode, and stand alone mode
Color effect: TGB tree color, and with CMY mix-color effect
Flash: 1-11times/second
Beam angle: 60 degree
Size: 32*28*28cm
It is controlled by international DMX512 signal, and Master/slave control.
Also stand alone ID addressing automatic control.
ⅱ. DMX512 control: first, signal output of the controller connected to the signal input of the fist light with XLR-XLR controllign line. Then connected to the input of second light from the outpout of fist light, and as the same step to the last one, then insert the accessary circuit of the cotroller to the signal output of the last one. For example:

1. CHANNEL CONTROLLING INSTRUCTION

1. DMX512 control ID addressing( take the channel 16 and 20 for exmaple)

Ⅲ. Stand alone performance automatic controlled by ID addressing(the light doesn’t adopt the DMX512 control, we can choose many kinds of automatic effect by ID addressing), for example:

Ⅳ. Master/slave control:
This lights has a feature that adopted by Master/slave control(light must be connected each other when adopted the Master/slave control). You can choose one of the light for the Master light, and the rest for Slave light. But that just have only one Master light in one team. Choosing one performancing effect by Master ID addressing, the Slave light will works synchronously. The ID addessing 1 of the Slave lights mean ON, and others means OFF.
It is very easy to control by this way.